Kia Sportage: Heating,Ventilation And Air Conditioning / Air conditioning System
Kia Sportage QL (2015-2025) Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System
- General safety information and caution
- Description and operation
- Repair procedures
- Components and components location
- Compressor oil Repair procedures
- Refrigerant Line Repair procedures
- Compressor Components and components location
- Compressor Description and operation
- Compressor Repair procedures
- Condenser Components and components location
- Condenser Repair procedures
- Receiver-Drier Repair procedures
- A/C Pressure Transducer Description and operation
- A/C Pressure Transducer Repair procedures
- Evaporator Core Repair procedures
- Evaporator Temperature Sensor Description and operation
- Evaporator Temperature Sensor Repair procedures
- In-car Sensor (DATC only) Description and operation
- Photo Sensor Description and operation
- Photo Sensor Repair procedures
- Ambient Temperature Sensor Description and operation
- Ambient Temperature Sensor Repair procedures
- Auto Defogging Sensor (DATC only) Description and operation
- Auto Defogging Sensor (DATC only) Repair procedures
- Cluster Ionizer (DATC only) Description and operation
- Cluster Ionizer (DATC only) Repair procedures
Troubleshooting
Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components, first determine if
the malfunction is due to lack of refrigerant, air ...
General safety information and caution
Instructions (R-134a)
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the skin of
your hand could result in localized fro ...
Other information:
Kia Sportage QL (2015-2025) Service Manual: Radiator Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air duct. (Refer to Intake and Exhaust System - "Air Cleaner") 3. Remove the engine room under cover. ...
Kia Sportage QL (2015-2025) Service Manual: Side Impact Sensor (SIS) Repair procedures
Removal Pressure side impact sensor (P-SIS) 1. Disconnect the battery negative terminal, and wait for at least thirty seconds before beginning work. 2. Remove the front door trim. (Refer to Body (Interior and Exterior) ...
Copyright © www.ksportagegl.com 2015-2025
