Kia Sportage: Air conditioning System / A/C Pressure Transducer Description and operation

A/C pressure transducer converts the pressure value of high pressure line into voltage value after measuring it. Based on the converted voltage value, engine ECU controls cooling fan by operating it at high or low speed. Engine ECU stops the operation of compressor when the temperature of refrigerant line is too high or low irregularly to optimize air conditioning system.

Receiver-Drier Repair procedures

Replacement 1. Remove the condenser. 2. Remove the cap (B) from the bottom of the condenser using an L wrench (A). ...

A/C Pressure Transducer Repair procedures

Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminals “1” and “2”. 2. ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Antenna Repair procedures

Removal Roof antenna 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3. Disconnect the roof antenna cable an ...

Kia Sportage QL (2015-2026) Service Manual: Components and components location

Component Location 1. Rear wiper arm & blade 2. Rear wiper arm nut 3. Rear wiper grommet 4. Rear wiper motor assembly 5. Rear wiper motor bolt ...