Kia Sportage: Adaptive Cruise Control / Setting the Adaptive Cruise Control Gap

Lincoln Corsair Owners Manual / Adaptive Cruise Control / Setting the Adaptive Cruise Control Gap

Lincoln Corsair. Setting the Adaptive Cruise Control Gap Press the button to cycle through the four gap settings.

Lincoln Corsair. Setting the Adaptive Cruise Control Gap

The selected gap appears in the instrument cluster display as shown by the bars in the image.

Note: The gap setting is time dependent and therefore, the distance adjusts with your vehicle speed.

Note: It is your responsibility to select a gap appropriate to the driving conditions.

Adaptive Cruise Control Gap Settings

Lincoln Corsair. Setting the Adaptive Cruise Control Gap

Each time you switch the system on, it selects the last chosen gap setting.

Following a Vehicle

When a vehicle ahead of you enters the same lane or a slower vehicle is ahead in the same lane, the vehicle speed adjusts to maintain the gap setting.

Note: When you are following a vehicle and you switch on a turn signal lamp, adaptive cruise control may provide a small, temporary acceleration to help you pass.

Your vehicle maintains a consistent gap from the vehicle ahead until:

The system applies the brakes to slow down your vehicle to maintain a safe gap distance from the vehicle in front of you. The system only applies limited braking. You can override the system by applying the brakes.

Note: The brakes may emit noise when applied by the system.

If the system determines that its maximum braking level is not sufficient, an audible warning sounds, a message appears in the instrument cluster display and an indicator flashes when the system continues to brake. Take immediate action.

Setting the Adaptive Cruise Control Speed
Drive to the speed you prefer. Press either button to set the current speed. Take your foot off the accelerator pedal. The indicator, current gap setting and set speed appear in the information dis ...

Canceling the Set Speed. Resuming the Set Speed. Overriding the Set Speed
Canceling the Set Speed Press the button or tap the brake pedal. The set speed does not erase. Resuming the Set Speed Press the button. Your vehicle speed returns to the previously set speed and ...

Other information:

Kia Sportage QL (2015-2021) Service Manual: Description and operation


Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start position, current ...

Kia Sportage QL (2015-2021) Service Manual: Specifications


Specifications Items Specification Hood Type Rear hinged, gas lifter type Front Door Construction Front hinged, frame door construction Regulator system ...

Copyright © www.ksportagegl.com 2015-2021