Other information:
Component Location
1. Driver power window switch
2. Assist power window switch
3. Smart junction block (SJB)
4. Door lock knob
5. Tailgate actuator
6. Door latch module
7. Door lock/unlock switch
8. Rear left power window switch
9. ...
If the multi fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse with a new one of the same rating.
5. Reverse these steps to reinstall the multi fuse.
✽ NOTICE
D ...