Kia Sportage: Garage Door Opener / Programming the Garage Door Opener to Your Gate Opener Motor

Lincoln Corsair Owners Manual / Garage Door Opener / Programming the Garage Door Opener to Your Gate Opener Motor

Gate Operator / Canadian Programming

Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators “time-out” in the same manner.

Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent possible overheating.

  1. Press and release, every two seconds, your hand-held transmitter until the HomeLink indicator light changes to a rapidly blinking or continuously on light.
  2. Release the hand-held transmitter button.
  3. Press and hold the HomeLink function button you want to program for two seconds, then release. You may need to do this twice to activate the door.

    Note: If the indicator light stays on, the programming is complete.

    Note: If the HomeLink indicator flashes rapidly, repeat Step 3.

    Note: If your device still does not operate, you must program your garage door.

  4. To program additional buttons, repeat Steps 1 – 4.
Programming the Garage Door Opener to Your Garage Door Opener Motor
Press the learn button on the garage door opener motor, you have 30 seconds to complete the next two steps. Return to your vehicle. Press and hold one of the three HomeLink function buttons ...

Clearing the Garage Door Opener. Reprogramming the Garage Door Opener. Garage Door Opener Radio Frequencies
Clearing the Garage Door Opener Press and hold the outer two function buttons simultaneously for approximately 10 seconds until the indicator light above the buttons flashes rapidly. When th ...

Other information:

Kia Sportage QL (2015-2021) Service Manual: Troubleshooting


Troubleshooting Symptoms Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Worn crankshaft bearings Loose or out of specification engine flywheel Replace the crankshaft and ...

Lincoln Corsair Owners Manual: Starting a Hybrid Electric Vehicle System


When the engine starts for the first time on your drive, the idle speed increases, this helps to warm up the engine. If the engine idle speed does not slow down, have your vehicle checked as soon as possible. Before starting your vehicle, check the following: Make sure all occupants fasten th ...

Copyright © www.ksportagegl.com 2015-2021