Other information:
If the main fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse with a new one of the same rating.
5. Reverse these steps to reinstall the main fuse.
✽ NOTICE
The ...
Component Location (1)
[Equal type]
1. Drive shaft (LH)
2. Drive shaft (RH)
3. Inner shaft bearing bracket
[Unequal type]
1. Drive shaft (LH)
2. Drive shaft (RH)
Component L ...