Kia Sportage: Hood / Hood Latch Release Handle Repair procedures

Kia Sportage QL (2015-2026) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement

1.	Using a remover, remove the hood release handle (A).

Install in the reverse order of removal.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks/unlocks and opens/closes properly.

Hood Latch Release Handle Components and components location

Component Location 1. Hood latch release handle ...

Hood Latch Components and components location

Component Location 1. Hood lower latch assembly ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Front Wheel Transfer Assembly Repair procedures

Removal 1. Remove the sub frame. (Refer to Suspension System - "Sub Frame") 2. Remove the drive shaft. (Refer to Driveshaft and axle - "Front Driveshaft ") 3. Remove t ...

Kia Sportage QL (2015-2026) Service Manual: Ignition Coil Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A). 4. ...