Kia Sportage: Body Side Molding / Fender Garnish Repair procedures

Kia Sportage QL (2015-2019) Service Manual / Body (Interior and Exterior) / Body Side Molding / Fender Garnish Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Loosen the fender garnish mounting screws.
2.
Using a remover, remove the fender garnish (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Spoiler Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Quarter Garnish Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Sportage QL (2015-2019) Service Manual: Front Wheel Transfer Assembly Components and components location


Components Location 1. Transfer assembly 2. Propeller shaft 3. Coupling assembly ...

Kia Sportage QL (2015-2019) Service Manual: Water Temperature Control Assembly Repair procedures


Removal and Installation 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2. Drain the engine coolant so its level is below water temperature control assembly. ...

Copyright © www.ksportagegl.com 2015-2019