Kia Sportage: Cruise control system / To set cruise control speed
1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE
indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which must be more than 20 mph (30 km/h).
3. Move the lever down (to SET-), and release it at the desired speed. The SET
indicator light in the instrument cluster will illuminate. Release the accelerator
at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down or speed up slightly while going
uphill or downhill.
The cruise control system allows you to program the vehicle to maintain a constant
speed without depressing the accelerator pedal.
This system is designed to function above approximately 20 mph ( ...
Follow either of these procedures:
Move the lever up (to RES+) and hold it.Your vehicle will accelerate.
Release the lever at the speed you want.
Move the lever up (to RES+) and release it ...
Other information:
Removal
In case of removing the high pressure fuel pump, high pressure fuel
pipe, delivery pipe, and injector, there may be injury caused by leakage
of the high pressure fuel. So don’t do any repair w ...
The rear parking assist system may not operate properly when:
1. Moisture is frozen to the sensor. (It will operate normally once the moisture
clears.
2. The sensor is covered with foreign matter, such as snow or water, or the sensor
cover is blocked. (It will operate normally when the materia ...