Kia Sportage: Restraint / Specifications
Kia Sportage QL (2015-2025) Service Manual / Restraint / Specifications
| Specification |
|
Item |
Resistance (Ω) |
|
Driver Airbag (DAB) |
1.7 - 2.3 |
|
Passenger Airbag (PAB) |
1.7 - 2.3 |
|
Side Airbag (SAB) |
1.8 - 2.4 |
|
Curtain Airbag (CAB) |
1.7 - 2.3 |
|
Seat Belt Pretensioner (BPT) |
1.7 - 2.3 |
|
Seat Belt Buckle Switch (BS) |
1.7 - 2.3 |
Tightening Torques
|
Item |
N·m |
kgf·m |
lb·ft |
|
Passenger airbag (PAB) |
4.9 - 6.8 |
0.5 - 0.7 |
3.6 - 5.0 |
|
Side airbag (SAB) |
6.9 - 8.8 |
0.6 - 0.8 |
5.1 - 6.5 |
|
Curtain airbag (CAB) bolt |
7.8 - 11.7 |
0.8 - 1.2 |
5.7 - 8.6 |
|
Curtain airbag (CAB) nut |
3.9 - 5.8 |
0.4 - 0.6 |
2.8 - 4.3 |
|
Seat belt anchor bolt (BPT) |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
Emergency Fastening Device (EFD) |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
Front impact sensor (FIS) |
6.8 - 8.8 |
0.7 - 0.9 |
5.0 - 6.5 |
|
Pressure side impact sensor (P-SIS) |
2.9 - 3.9 |
0.3 - 0.4 |
2.1 - 2.8 |
|
Gravity side impact sensor (G-SIS) |
6.8 - 8.8 |
0.7 - 0.9 |
5.0 - 6.5 |
|
Rear Gravity side impact sensor (R-SIS) |
6.8 - 8.8 |
0.7 - 0.9 |
5.0 - 6.5 |
|
SRS control module (SRSCM) |
7.8 - 13.7 |
0.8 - 1.4 |
5.8 - 10.1 |
General information
General
The supplemental restraint system (SRS) is designed to supplement the seat belt
to help reduce the risk or severity of injury to the driver and passenger by
activating an ...
Special service tools
Special Service Tools
Tool Name / Number
Illustration
Description
Deployment tool
0957A-34100A
Us ...
Other information:
Kia Sportage QL (2015-2025) Service Manual: Seat Belt Reminder Repair procedures
Removal 1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work. 2. Remove the front seat assembly. (Refer to Body (Interior and Exterior) - "Front Seat Assembly" ...
Kia Sportage QL (2015-2025) Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...
Copyright © www.ksportagegl.com 2015-2025
