Kia Sportage: Body Side Molding / Side Sill Molding Repair procedures

Kia Sportage QL (2015-2020) Service Manual / Body (Interior and Exterior) / Body Side Molding / Side Sill Molding Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Loosen the side sill molding mounting screws.
2.
Using a remover, remove the side sill molding (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Mud Guard Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Cowl Top Cover
...

Other information:

Kia Sportage QL (2015-2020) Service Manual: Specifications


Specifications Item Specification M • Type single piston • I.D. mm(in) 22.22 mm (0.875 in) • Piston stroke mm(in) 45±1 mm (1.77 ± 0.039 in) ...

Kia Sportage QL (2015-2020) Service Manual: Crankshaft Position Sensor (CKPS) Description and operation


Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed on the cylinder ...

Copyright © www.ksportagegl.com 2015-2020