Kia Sportage: Lighting System / Room Lamp Repair procedures

Kia Sportage QL (2015-2026) Service Manual / Body Electrical System / Lighting System / Room Lamp Repair procedures

Removal

•	Put on gloves to prevent hand injuries.

•	When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

1.	Disconnect the negative (-) battery terminal.

2.	Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

Remove the room lamp (A) after loosening the screws.

•	When removing the room lamp, be careful of the direction in which the tool is inserted (B).

•	When inserting the tool in the opposite direction, take caution as the room lamp may be damaged.

4.	Remove the room lamp assembly (B) after disconnecting the room lamp connector (A).

Bulb Replacement

1.	Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

2.	Disconnect the room lamp bulb (A).

Installation

1.	Connect the room lamp connector.

2.	Install the room lamp.

3.	Install the room lamp lens.

4.	Connect the negative (-) battery terminal.

Turn Signal Lamp Repair procedures

Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mir ...

Vanity Lamp Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Cooling Fan Components and components location

Components 1. Cooling fan 2. Fan motor 3. Cooling fan shroud 4. Cooling fan resistor ...

Kia Sportage QL (2015-2026) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within ...