Kia Sportage: Hood / Repair procedures

Kia Sportage QL (2015-2021) Service Manual / Body (Interior and Exterior) / Hood / Repair procedures

Adjustment
1.
After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
3.
After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down, or right and left.

Hood
...

Hood Assembly Components and components location
Component Location 1. Hood assembly ...

Other information:

Kia Sportage QL (2015-2021) Service Manual: Instrument Cluster Repair procedures


Removal    • Put on gloves to protect your hands. • When removing with a flat-tip screwdriver or remover, wrap protective tape aro ...

Kia Sportage QL (2015-2021) Service Manual: Blind Spot Detection Radar Calibration Repair procedures


Inspection Correction Overview Need to calibrate the mounting angle of the BSD when a vehicle has a rear or a side collision with BSD system even just replacing a BSD bracket or BSD components. Check before Correction 1. When a failure code [C2702 (M ...

Copyright © www.ksportagegl.com 2015-2021