Kia Sportage: Hood / Hood Assembly Components and components location

Kia Sportage QL (2015-2026) Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Components and components location

Component Location

1. Hood assembly

Repair procedures

Adjustment 1. After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. 2. Adj ...

Hood Assembly Repair procedures

Replacement Be careful not to damage the hood and body. ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Seat Belt Pretensioner (BPT) Repair procedures

Removal 1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work. 2. Remove the door scurff trim. (Refer to Body (Interior and Exterior) - "Door scuff trim") ...

Kia Sportage QL (2015-2026) Service Manual: Repair procedures

Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...