Kia Sportage: Headrest (for front seat) / Removal and reinstallation

■ Type A

■ Type B
To remove the headrest:
1. Recline the seatback (2) with the recline lever or switch (1).
2. Raise headrest as far as it can go.
3. Press the headrest release button (3) while pulling the headrest up (4).
WARNING - Headrest Removal
NEVER allow anyone to ride in a seat with the headrest removed. Headrests
can provide critical neck and head support in a crash.

■ Type A

■ Type B
To reinstall the headrest :
1. Put the headrest poles (2) into the holes while pressing the release button
(1) or switch(1).
2. Recline the seatback (4) with the recline lever or switch (3).
3. Adjust the headrest to the appropriate height.
WARNING - Headrest Reinstallation
To reduce the risk of injury to the head or neck, always make sure the headrest
is locked into position and adjusted properly after reinstalling.
To raise the headrest, pull it up to the desired position (1). To lower the headrest,
push and hold the release button (2) on the headrest support and lower the headrest
to the desired position ...
The seatback pocket is provided on the back of the front passenger’s and driver’s
seatbacks.
WARNING - Seatback pockets
Do not put heavy or sharp objects in the seatback pockets. In an accid ...
Other information:
If the vehicle detected by sensors approaches your vehicle, the warning
chime will sound and the warning light will blink on the outside rearview mirror.
If the detected object is not in your way, move the vehicle away from
the detected object slowly; and the warning will cancel onc ...
Circuit Diagram
Terminal Illustration
Terminal Function
Pin No.
Description
1
Fuel sender ground
2
Fuel pressure sensor (FPS) signal input
3
...