Other information:
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) from the bottom of the condenser using an L wrench
(A).
Tightening torque :
9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft)
...
1. Turn the ignition switch and all other switches off.
2. Open the fuse panel cover.
If the switch is located in the “OFF” position, a caution indicator will be displayed
in the cluster.
CAUTION
When replacing a blown fuse or relay, make sure the new fuse or relay
fits tightly int ...