Kia Sportage: Operation of the parking assist system / Type of warning indicator and sound
.png)
✽ NOTICE
- The actual warning sound and indicator may differ from the illustration
according to objects or sensor status.
- Do not wash the vehicle's sensor with high pressure water.
✽ NOTICE
- This system can only sense objects within the range and location of
the sensors; It can not detect objects in other areas where sensors are not
installed. Also, small or slim objects, such as poles or objects located between
sensors may not be detected by the sensors. Always visually check behind the
vehicle when backing up.
- Be sure to inform any drivers of the vehicle that may be unfamiliar
with the system regarding the systems capabilities and limitations.
This system activates when the parking assist system button is pressed
with the ignition switch ON.
The indicator of the parking assist system button turns on automatically
and activates ...
Parking assist system may not operate normally when:
1. Moisture is frozen to the sensor. (It will operate normally when moisture
melts.)
2. Sensor is covered with foreign matter, such as snow or ...
Other information:
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input, the
SRSCM activates the warning lamp for a LED lamp check.
The lamp shall turn on for 6 seconds during the initialization ...
Removal
1.
Disconnect the battery negative terminal, and wait for at least three
minutes before beginning to work.
2.
Remove the door scurff trim.
(Refer to Body (Interior and Exterior) - "Door scuff trim")
...