Kia Sportage: Automatic Transaxle Control System / Input Speed Sensor Specifications

Kia Sportage QL (2015-2026) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications

Specification
Item
Specification
Type
Hall effect sensor
Operating condition (°C)°F
(-40 to 150) -40 to 302
Output voltage (V)
High : 1.18 - 1.68
Low : 0.59 - 0.84

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Switch "OFF" ignition. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - &qu ...

Input Speed Sensor Description and operation
Description • Input speed sensor uses an electric current type hall sensor in which the current is changed by the magnetic variation. • ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Rear Sub Frame Repair procedures


Removal [2WD] 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Kia Sportage QL (2015-2026) Service Manual: Components and components location


Component Location 1. Rear wiper arm & blade 2. Rear wiper arm nut 3. Rear wiper grommet 4. Rear wiper motor assembly 5. Rear wiper motor bolt ...

Copyright © www.ksportagegl.com 2015-2026