Kia Sportage: Automatic Transaxle Control System / Inhibitor Switch Description and operation

Kia Sportage QL (2015-2025) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Description and operation

Description

•	The inhibitor switch is installed on top of transaxle, and is connected to the shift lever by a shift cable.

•	Inhibitor switch signals (S1, S2, S3, S4) are transmitted to the TCM according to the driver's shift lever control.

Inhibitor Switch Specifications

Specification Item Specification Power supply (V) 12 Output type Combination of output signals ...

Inhibitor Switch Description and operation

Description • The inhibitor switch is installed on top of transaxle, and is connected to the shift lever by a shift cable. • In ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: Description and operation

Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the vehicle in the back and senses and sets off (visual and auditory) alarms for any vehicle coming into the blind spot. – ...

Kia Sportage QL (2015-2025) Service Manual: Auto Defogging Sensor (DATC only) Repair procedures

Inspection To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the auto defogging sensor cover (A). ...