Kia Sportage: Automatic Transaxle Control System / Inhibitor Switch Specifications

Kia Sportage QL (2015-2025) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Specifications

Specification

Item	Specification
Power supply (V)	12
Output type	Combination of output signals

Signal Code Table

	P	P-R	R	R-N	N	N-D	D
Signal "1"	12 V	12 V	0	0	0	0	0
Signal "2"	0	12 V	12 V	12 V	0	0	0
Signal "3"	0	0	0	12 V	12 V	12 V	0
Signal "4"	0	0	0	0	0	12 V	12 V

SS-A Solenoid Valve (ON/OFF) Repair procedures

Inspection 1. Switch "OFF" ignition. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - &qu ...

Inhibitor Switch Description and operation

Description • The inhibitor switch is installed on top of transaxle, and is connected to the shift lever by a shift cable. • In ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: Rear Assist Arm Repair procedures

Removal 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Kia Sportage QL (2015-2025) Owners Manual: Stop and tail lamp bulb replacement

1. Open the tailgate. 2. Open the service cover. 3. Loosen the light assembly retaining screws with a cross-tip screwdriver. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Disconnect the rear combination lamp connector. 6. Remove the socket from the assembly ...