Kia Sportage: Automatic Transaxle Control System / Inhibitor Switch Description and operation

Kia Sportage QL (2015-2025) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Description and operation

Description
The inhibitor switch is installed on top of transaxle, and is connected to the shift lever by a shift cable.
Inhibitor switch signals (S1, S2, S3, S4) are transmitted to the TCM according to the driver's shift lever control.

Inhibitor Switch Description and operation
Description • The inhibitor switch is installed on top of transaxle, and is connected to the shift lever by a shift cable. • In ...

Inhibitor Switch Troubleshooting
Troubleshooting ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: Mode Control Actuator Repair procedures


Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected to terminal 3 ...

Kia Sportage QL (2015-2025) Service Manual: Vacuum Pump Repair procedures


Remove [Nu 2.0 MPI/ FFV, THETA II 2.4 GDI] 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the under cover. (Refer to Engine Mechanical System - "Engine room under cover') ...

Copyright © www.ksportagegl.com 2015-2025