Kia Sportage: Engine And Transaxle Assembly / Engine Room Under Cover Repair procedures

Kia Sportage QL (2015-2026) Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Room Under Cover Repair procedures

Removal and Installation

Engine Room Under Cover

Remove the engine room under cover (A).

Tightening torque :

7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.7 - 8.6 lb·ft)

2.	Install in the reverse order of removal.

Engine Room Rear Under Cover

Remove the engine room rear under cover (A).

Tightening torque :

7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.7 - 8.6 lb·ft)

2.	Install in the reverse order of removal.

Engine Cover Repair procedures

Removal and Installation 1. Remove the engine cover (A). ...

Engine Mounting Components and components location

Components 1. Engine mounting support bracket 2. Engine mounting bracket 3. Roll rod bracket 4. Transaxle mounting bracket ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Photo Sensor Repair procedures

Inspection 1. Turn the ignition switch ON. 2. Connect the KDS/GDS. 3. Flash an intensive light onto the photo sensor using a lamp, and check the change in output voltage. 4. ...

Kia Sportage QL (2015-2026) Service Manual: Fuel Pressure Regulator Repair procedures

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the electric pump wiring connector (A), and the fuel sender connector (B). 3. Re ...