Kia Sportage: ESP(Electronic Stability Program) System / DBC Switch Description and operation

The DBC function is the acronym word of Downhill Brake Control function. When a vehicle goes down the hill, just pushing the DBC switch enables the car to keep its vehicle's speed at a constant value without operating the brake pedal. The DBC function is operat]ed when the vehicle is on the decline and its velocity is under the predetermined speed.

ESP OFF Switch Repair procedures

Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. ( ...

DBC Switch Repair procedures

Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the console upper cover. ...

Other information:

Kia Sportage QL (2015-2021) Owners Manual: Certification label

The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. ...

Kia Sportage QL (2015-2021) Service Manual: Repair procedures

Inspection AEB function ON / OFF switch was included to USM (User Setting Menu) and the state of the factory is ON. When the IGN On, maintain ON condition by default. And does not reflect the driver settings when next IGN On. If turned the ESC function Off, the AEB fu ...