Kia Sportage: Mirrors / Canadian Programming Garage & gate openers
During programming, your hand-held transmitter may automatically stop transmitting.
Continue to press and hold the HomeLink button (note steps 2 through 4 in the “Programming”
portion of this text) while you press and re-press (“cycle”) your handheld transmitter
every two seconds until the frequency signal has been learned. The indicator light
will flash slowly and then rapidly after several seconds upon successful training.
To program a device to HomeLink using a HomeLink button previously trained, follow
these steps:
1. Press and hold the desired HomeLink button. Do NOT release until step 4 has
been completed.
2. ...
If you would like additional information on the HomeLink Wireless Control System,
HomeLink compatible products, or to purchase other accessories such as the HomeLink®
Lighting Package, please con ...
Other information:
Description
The charging system included a battery, an alternator with a built-in regulator,
and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator " ...
Signal Waveform
Service data review releated with fuel pressure sensor at idle and acceleration.
(Inspect low pressure fuel line between fuel pump and high pressure pump first
when the pressure of low pressure line is displayed low at idle.)
A : Idle
B : Accele ...