Kia Sportage: Cooling System / Cooling Fan Specifications

Kia Sportage QL (2015-2025) Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Specifications

Specifications
Item
Specification
Fan type
Puller
Fan speed control
Resistor
Air flow rate [㎥/h (yd³/h)]
2,500 (3,270) -8% min.
Fan speed (rpm)
1,800 ± 8%
Current (A)
17.3 +10% max.

Cooling Fan Description and operation
Description [Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperatu ...

Cooling Fan Schematic diagrams
Circuit Diagram ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: Inhibitor Switch Description and operation


Description • The inhibitor switch is installed on top of transaxle, and is connected to the shift lever by a shift cable. • Inhibitor switch signals (S1, S2, S3, S4) are transmitted to the TCM according to the driver' ...

Kia Sportage QL (2015-2025) Service Manual: Repair procedures


Adjustment Inspect Glass Alignment 1. Inspect the alignment of the movable glass (C) between the front (A) and rear (B) glass and adjust it if needed. Alignment adjustment Standard value [mm(in.)] (1) Fro ...

Copyright © www.ksportagegl.com 2015-2025