Kia Sportage: Maintenance / Vapor Hose and Fuel Filler Cap

Repair procedures

Inspection [Theta-II 2.4 GDI] Check the valve clearance. If necessary, adjust the valve clearance by replacing the tappets. ...

Repair procedures

Inspection Vapor hose 1. Check all the clamps for tightness and the connections for leakage. 2. Visually check the vapor lines an ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Repair procedures

Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...

Kia Sportage QL (2015-2026) Service Manual: Hood Latch Repair procedures

Replacement 1. Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover") 2. Disconnect the hood lower latch connector (A). 3. Remove the air duct (A). ...