Kia Sportage: Automatic Transaxle Control System / Valve Body Repair procedures

Kia Sportage QL (2015-2026) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Valve Body Repair procedures

Replacement

It is not recommended to replace the valve body or each solenoid valve individually. If the valve body or a solenoid valve needs to be replaced, the automatic transmission assembly should be replaced and the oil pressure characteristics should be input using the KDS/GDS. If replacing the valve body or a solenoid valve individually, it is not possible to input the oil pressure characteristics using the KDS/GDS and if not performing the oil pressure characteristics input procedure, a shift shock or delay may occur.

1.	Replace the automatic transaxle assembly. (Refer to Automatic Transaxle System - "Automatic Transaxle System")

Valve Body Components and components location

Components Location 1. Automatic transaxle 2. Input/Output speed sensor 3. Valve body assembly 4. Solenoid valve connector module 5. Valve body ...

4 Wheel Drive (4WD) System

...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Crash Pad Garnish [RH] Repair procedures

Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove inter ...

Kia Sportage QL (2015-2026) Service Manual: Starter Components and components location

Components 1. Front bracket 2. Stop ring 3. Stopper 4. Overrun clutch assembly 5. Internal gear assembly 6. Lever 7. Lever packing 8. Magnet switch assembly 9. Planet shaft assembly 10. Planetary gear assembly 11. Packing 1 ...