Kia Sportage: Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Specifications

Kia Sportage QL (2015-2025) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Specifications

Specification
Item
Specification
Type
*NTC thermistor
Temp.[(°C)°F] / Resistance (kΩ)
(-40)-40 / 48.1
(-20)-4.0 / 15.6
(0)32.0 / 5.88
(20)68.0 / 2.51
(40)104.0 / 1.19
(60)140.0 / 0.61
(80)176.0 / 0.32
(100)212.0 / 0.18
(120)248.0 / 0.10
(140)284.0 / 0.06
(150)302.0 / 0.05

*NTC : Negative Temperature Coefficient
Transaxle Control Module (TCM) Repair procedures
Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connected to the chassis ground with the ...

Transaxle Oil Temperature Sensor Description and operation
Description • The sensor used is a thermistor (NTC) in which resistance changes with temperature variation. • The TCM supplies ...

Other information:

Kia Sportage QL (2015-2025) Owners Manual: Limitation of Active ECO operation


If the following conditions occur while Active ECO is operating, the system operation is limited even though there is no change in the ECO indicator. When the coolant temperature is low: The system will be limited until engine performance becomes normal. When driving up a hill: The system ...

Kia Sportage QL (2015-2025) Service Manual: Antenna Coil Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column shroud panel. (Refer to Body - "Steering Column Shroud Panel") 3. Disconnect the 6P connector (A) o ...

Copyright © www.ksportagegl.com 2015-2025