Kia Sportage: Heating and air conditioning / Sunroof inside air recirculation
If the sunroof opens while the heater or Air Conditioning system operates, the outside (fresh) air will be selected automatically for ventilating the car. Then, if you select the recirculated air position, the outside (fresh) air will be selected automatically after 3 minutes.
If you close the sunroof, the intake mode will be changed to the previous selected mode.
WARNING - Reduced visibility
Continued use of the climate control system in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.
WARNING - Sleeping with AC on
Do not sleep in a vehicle with the air conditioning or heating system on as this may cause serious harm or death due to a drop in the oxygen level and/or body temperature.
WARNING - Recirculated air
Continued use of the climate control system in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.
Air intake control
The air intake control is used to select the outside (fresh) air position or
recirculated air position.
To change the air intake control position, press the control button.
Recirculated air posi ...
Fan speed control
The ignition switch must be in the ON position for fan operation.
The fan speed control knob allows you to control the fan speed of the air flowing
from the ventilation system. To change the fan ...
Other information:
Kia Sportage QL (2015-2025) Service Manual: Description and operation
Description Automatic transaxle control system relies on various measurements to determine the current control status and determine the necessary compensation values. These values are used to control the actuators and achieve the desired control output. Operation ...
Kia Sportage QL (2015-2025) Owners Manual: Tail lamp (inside) bulb replacement
1. Open the tailgate. 2. Remove the service cover. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from the socket by pressing it in and rotating it counter-clockwise until ...
