Kia Sportage: Heating and air conditioning / Fan speed control

Kia Sportage QL (2015-2020) Owners Manual / Features of your vehicle / Manual climate control system / Heating and air conditioning / Fan speed control

The ignition switch must be in the ON position for fan operation.

The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan speed, turn the knob to the right for higher speed or left for lower speed.

Setting the fan speed control knob to the “0” position turns off the fan.

Sunroof inside air recirculation
If the sunroof opens while the heater or Air Conditioning system operates, the outside (fresh) air will be selected automatically for ventilating the car. Then, if you select the recirculated air ...

Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light will illuminate). Press the button again to turn the air conditioning system off. ...

Other information:

Kia Sportage QL (2015-2020) Service Manual: Rail Pressure Sensor (RPS) Description and operation


Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...

Kia Sportage QL (2015-2020) Service Manual: Canister Repair procedures


Removal 1. Remove the fuel tank. (Refter to Engine Control / Fuel System - "Fuel Tank") 2. Disconnect the vapor hose quick-connector (A) and ventilation hose (B). 3. Remove the protec ...

Copyright © www.ksportagegl.com 2015-2020