Kia Sportage: Starting System / Starter Schematic diagrams

Starter Description and operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connecti ...

Starter Repair procedures

Removal 1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - & ...

Other information:

Kia Sportage QL (2015-2024) Service Manual: Blower Resistor (Manual) Repair procedures

Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Replacement ...

Kia Sportage QL (2015-2024) Service Manual: Side Impact Sensor (SIS) Description and operation

Description • Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH) and two ...