Kia Sportage: SRSCM / Seat Belt Buckle Switch (BS) Description and operation
The SRSCM shall monitor the status of the driver and front passenger seat belt
buckle. The SRSCM provides one pin each for the driver and front passenger seat
belt buckle status input. The seat belt buckle circuit operates from internal
boost voltage supplied by the SRSCM, and uses chassis ground for the signal
return. The buckle status shall modify the SRSCM deployment. If the buckle status
is unbuckled, the corresponding pretensioner will not be deactivated.
Removal
Pressure side impact sensor (P-SIS)
1.
Disconnect the battery negative terminal, and wait for at least thirty
seconds before beginning work.
...
Components
1. Seat Belt Buckle Switch (BS) ...
Other information:
Removal
In case of removing the high pressure fuel pump, high pressure fuel
pipe, delivery pipe, and injector, there may be injury caused by leakage
of the high pressure fuel. So don’t do any repair w ...
■ Type A
■ Type B
To remove the headrest:
1. Recline the seatback (2) with the recline lever or switch (1).
2. Raise headrest as far as it can go.
3. Press the headrest release button (3) while pulling the headrest up (4).
WARNING - Headrest Removal
NEVER allow anyone to ride in a sea ...