Kia Sportage: Driveshaft and axle / Rear Driveshaft Assembly / Rear Driveshaft Assembly

Repair procedures

Removal [2WD] 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m ...

Components and components location

Component Location 1. Rear drive shaft (LH) 2. Rear drive shaft (RH) ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within ...

Kia Sportage QL (2015-2025) Service Manual: Wheel Repair procedures

Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)    When using an impact gun, f ...