Kia Sportage: Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier

Repair procedures

Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tighte ...

Components and components location

Components [NON-EPB Type] 1. Rear brake disc 2. Rear hub assembly 3. Dust cover 4. Rear carrier assembly [EPB Type] ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: In-car Sensor (DATC only) Description and operation

Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor consists of a thermistor that measures the inside temperature. The signal decided by the resistance value that changes in accordance with perceived inside temperature, ...

Kia Sportage QL (2015-2026) Service Manual: MDPS Motor Repair procedures

Replacement 1. Disconnect the battery negative cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel") 3. Loosen the mounting screws and remove the steering ...