Kia Sportage: Coupling Assembly / Pressure Sensor Description and operation

Kia Sportage QL (2015-2025) Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor Description and operation

Description
The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque value varies according to a pressure status.

Pressure Sensor Description and operation
Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into ...

Pressure Sensor Repair procedures
Inspection    If you have trouble code related to the pressure sensor check pressure sensor according to the i ...

Other information:

Kia Sportage QL (2015-2025) Owners Manual: Distributing the sealant


11. Immediately drive approximately 4~6 miles (7~10 km or, about 10 min) to evenly distribute the sealant in the tire. Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed of 12 mph (20 km/h). While driving, if you experience any unusual vibration, ride disturbance ...

Kia Sportage QL (2015-2025) Service Manual: Passenger Airbag (PAB) Module Repair procedures


Removal 1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work. 2. Remove the glove box assembly. (Refer to Body (Interior and Exterior) - "Glove box housing") ...

Copyright © www.ksportagegl.com 2015-2025