Kia Sportage: Closing the liftgate / Power liftgate opening height user setting
.png)
The driver may set the height of a fully opened liftgate by following the below
instruction.
1. Position the liftgate manually to the height you prefer.
2. Press the liftgate close button for more than 3 seconds.
3. Close the liftgate manually after hearing the buzzer sound.
The liftgate will open to the height the driver has set up.
If the battery has been discharged or disconnected, or if the related fuse has
been replaced or disconnected, for the power liftgate to operate normally, reset
the power liftgate as follows:
1. P ...
On a vehicle equipped with a smart key, the liftgate can be opened using the
Smart Power Liftgate system. ...
Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Remove the front fog lamp assembly (A) after loosening the ...
Replacement
•
Be careful not to damage the fender and body.
•
Use a plastic panel removal tool to remove interior trim pieces
...