Kia Sportage: Closing the liftgate / How to reset the power liftgate
If the battery has been discharged or disconnected, or if the related fuse has
been replaced or disconnected, for the power liftgate to operate normally, reset
the power liftgate as follows:
1. Put the automatic shift lever in P (Park).
2. While pressing the liftgate close button, press the liftgate handle switch
for more than 3 seconds. (the chime will sound)
3. Close the liftgate manually.
If the power liftgate does not work properly after the above procedure, have
the system checked by an authorized Kia dealer.
✽ NOTICE
If the power liftgate does not operate normally, first check the following
condition before using the power liftgate.
Make sure the automatic shift lever is in P (Park).
During power opening and closing if the power liftgate is blocked by an object
or part of the body, the power liftgate will detect the resistance.
If the resistance is detected while opening t ...
The driver may set the height of a fully opened liftgate by following the below
instruction.
1. Position the liftgate manually to the height you prefer.
2. Press the liftgate close button for mo ...
Other information:
The LATCH system holds a child restraint during driving and in an accident. This
system is designed to make installation of the child restraint easier and reduce
the possibility of improperly installing your child restraint. The LATCH system
uses anchors in the vehicle and attachments on the c ...
Removal
1.
Remove wheel nuts, wheel and tire (A) from hub.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
...