Other information:
■ Front
■ Rear
1. Open the tailgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the upper (front) / lower (rear) part of the
cover on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is
fully secured.
4. Remo ...
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V) [Vr ...