Kia Sportage: Maintenance services / Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to perform.
As explained earlier in this section, several procedures can be done only by an authorized Kia dealer with special tools.
✽ NOTICE
Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Warranty & Consumer Information manual provided with the vehicle. If you're unsure about any servicing or maintenance procedure, have it done by an authorized Kia dealer.
WARNING - Maintenance work
Do not wear jewelry or loose clothing while working under the hood of your vehicle with the engine running. These can become entangled in moving parts, if you must run the engine while working under the hood, make certain that you remove all jewelry (especially rings, bracelets, watches, and necklaces) and all neckties, scarves, and similar loose clothing before getting near the engine or cooling fans.
Owner’s responsibility
✽ NOTICE
Maintenance Service and Record Retention are the owner's responsibility.
You should retain documents that show proper maintenance has been performed
on your vehicle in accordance wi ...
Owner maintenance
The following lists are vehicle checks and inspections that should be performed
by the owner or an authorized Kia dealer at the frequencies indicated to help ensure
safe, dependable operation of y ...
Other information:
Kia Sportage QL (2015-2021) Owners Manual: Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, you must reset your sunroof system as follows: 1.Start the engine. 2.Close the sunshade and sunroof completely if opened. 3.Release the sunroof control lever. 4.Push the sunroof control lever forward in the direction of close until th ...
Kia Sportage QL (2015-2021) Service Manual: Shift Lever Components and components location
Components 1. Shift lever knob & boots 2. Shift lever assembly 3. Shift cable assembly ...