Kia Sportage: Mirrors / Operating HomeLink
To operate, simply press the programmed HomeLink button. Activation will now
occur for the trained product (garage door, security system, entry door lock, estate
gate, or home or office lighting). For convenience, the hand-held transmitter of
the device may also be used at any time. The HomeLink Wireless Controls System (once
programmed) or the original hand-held transmitter may be used to activate the device
(e.g. garage door, entry door lock, etc.). In the event that there are still programming
difficulties, contact HomeLink at 1-800-355-3515 or on the internet at www.homelink.com.
To train a garage door opener (or other rolling code equipped devices) with the
rolling code feature, follow these instructions after completing the “Programming”
portion of this text. (A seco ...
To erase the three programmed buttons (individual buttons cannot be erased):
Press and hold the left and center buttons simultaneously, until the indicator
light begins to flash (approximatel ...
Other information:
This indicator light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 3 seconds and then goes off.
When you select AWD Lock mode by pressing the AWD LOCK button.
- The AWD LOCK mode is to increase the driv ...
• This warning message may appear when :
- There are foreign substances on the rear bumper or inside the rear bumper.
- The vehicle carries a trailer or carrier on the rear.
- Driving in rural areas with little traffic or open terrains such as wide expanse
of desert.
- There is heavy snow ...