Kia Sportage: Scheduled maintenance service / Maintenance Under Severe Usage Conditions - Non Turbo Models

Kia Sportage QL (2015-2020) Owners Manual / Maintenance / Scheduled maintenance service / Maintenance Under Severe Usage Conditions - Non Turbo Models

The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals.

R : Replace

I : Inspect and, after inspection, clean, adjust, repair or replace if necessary

Severe driving conditions

A- Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature
B- Extensive engine idling or low speed driving for long distances
C-Driving on rough, dusty, muddy, unpaved, graveled or saltspread roads
D-Driving in areas using salt or other corrosive materials or in very cold weather
E-Driving in heavy dust condition
F - Driving in heavy traffic area
G- Driving on uphill, downhill, or mountain road repeatedly
H-Towing a Trailer, or using a camper, or roof rack
I -Driving as a patrol car, taxi, other commercial use or vehicle towing
J - Driving over 106 mph (170 km/h)
K-Frequently driving in stop-and-go conditions

Normal Maintenance Schedule - Non Turbo Models
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage a ...

Explanation of scheduled maintenance items
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil an ...

Other information:

Kia Sportage QL (2015-2020) Service Manual: Cluster Fascia Panel Repair procedures


Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove inter ...

Kia Sportage QL (2015-2020) Service Manual: Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") 3. Disconnect the body control module connectors (A). ...

Copyright © www.ksportagegl.com 2015-2020