Kia Sportage: Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Specifications

Kia Sportage QL (2015-2026) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Specifications

Specification
Item
Specification
Control type
N/H (Normal High)
Control pressure (kpa (kgf/cm², psi))
0 - 519.75 (0 - 5.3, 0 - 75.38)
Currency (mA)
0 - 850
Coil resistance (Ω)
5.1 ± 0.3

Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Repair procedures
Inspection 1. Switch "OFF" ignition. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - &qu ...

Line Pressure Control Solenoid Valve Components and components location
Component Location 1. 26 Brake Control Solenoid Valve (26/B) 2. 35R Clutch Control Solenoid Valve (35R/C) 3. Underdrive Brake Control Solenoid Valve (UD/B) ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Cylinder Block Repair procedures


Disassembly    In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repa ...

Kia Sportage QL (2015-2026) Owners Manual: Tire rotation


To equalize tread wear, it is recommended that the tires be rotated every 7,500 miles (12,000 km) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire ...

Copyright © www.ksportagegl.com 2015-2026