Other information:
If the main fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse with a new one of the same rating.
5. Reverse these steps to reinstall the main fuse.
✽ NOTICE
The ...
Specification
Item
Specification
Control type
N/L (Normal Low)
Control pressure (kpa (kgf/cm², psi))
0 - 1569.06 (0 - 16, 0 - 227.57)
Currency (mA)
0 - 1100
...