Kia Sportage: Engine Control System / Intake Air Temperature Sensor (IATS) Specifications

Kia Sportage QL (2015-2019) Service Manual / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Specifications

Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 - 48.35
-20
-4
13.89 - 16.03
0
32
5.38 - 6.09
10
50
3.48 - 3.90
20
68
2.31 - 2.57
40
104
1.08 - 1.21
60
140
0.54 - 0.62
80
176
0.29 - 0.34

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. ...

Intake Air Temperature Sensor (IATS) Description and operation
Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, ...

Other information:

Kia Sportage QL (2015-2019) Service Manual: Repair procedures


General Inspection Before and after servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection. ...

Kia Sportage QL (2015-2019) Service Manual: Smart Parking Assist System Unit Repair procedures


Removal    • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Copyright © www.ksportagegl.com 2015-2019