Kia Sportage: Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Kia Sportage QL (2015-2022) Service Manual / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) Thermister and it's resistance changes in reverse proportion to the temperature.

Intake Air Temperature Sensor (IATS) Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 40.93 - 48.35 ...

Intake Air Temperature Sensor (IATS) Schematic diagrams
Circuit Diagram Harness Connector ...

Other information:

Lincoln Corsair Owners Manual: Rear Window Wiper and Washers


Rear Window Wiper Intermittent wipe. Continuous wipe. Rear window wiper off. Depending on your vehicle, when you switch on the front wipers and move the gearshift lever to reverse (R), the rear intermittent wipe may turn on. Note: Make sure you switch the rear window wiper off before enter ...

Kia Sportage QL (2015-2022) Service Manual: Shift Lever Repair procedures


Removal 1. Shift the gear to "N". 2. Remove the knob & boots (A) by pulling the direction of arrow after removing the boots from the console upper cover. 3. Remove the floor cons ...

Copyright © www.ksportagegl.com 2015-2022