Kia Sportage: Light bulbs / Position lamp + DRL bulb replacement
.png)
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembly.
3. Remove the bulb from the bulbsocket by pressing it in and rotating it counterclockwise
until the tabs on the bulb align with the slots in the bulb-socket. Pull the bulb
out of the bulb-socket
4. Insert a new bulb by inserting it into the bulb-socket and rotating it until
it locks into place.
5. Install the socket in the headlamp assembly by aligning the tabs on the bulb-socket
with the slots in the assembly. Push the bulb-socket into the headlamp assembly
and turn the socket clockwise.
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembl ...
■ Type A
■ Type B
If the front fog lamp (Bulb and LED type) does not operate, we recommend that
you have your vehicle checked by an authorized Kia dealer. ...
Other information:
Remove all contaminations instantly. Refer to instructions below for removal
of each contaminant.
Cosmetic products(sunscreen, foundation, etc.)
- Apply cleansing cream on a cloth and wipe the contaminated point. Wipe off
the cream with a wet cloth and remove water with a dry cloth.
B ...
Description
Automatic transaxle control system relies on various measurements to determine
the current control status and determine the necessary compensation values.
These values are used to control the actuators and achieve the desired control
output.
Operation
...