Kia Sportage: Blower / Intake Actuator Description and operation

Kia Sportage QL (2015-2020) Service Manual / Heating,Ventilation And Air Conditioning / Blower / Intake Actuator Description and operation

Description
Located in the blower unit, the intake actuator regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filter Repair procedures
Replacement 1. Remove the stopper (B) from the glove box (A). 2. Remove the air damper (A) from the glove box (B). ...

Intake Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that t ...

Other information:

Kia Sportage QL (2015-2020) Service Manual: Tailgate Trim Repair procedures


Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove inter ...

Kia Sportage QL (2015-2020) Service Manual: ETC (Electronic Throttle Control) System Repair procedures


Inspection Throttle Position Sensor (TPS) 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Throttle Angl ...

Copyright © www.ksportagegl.com 2015-2020