Kia Sportage: Blower / Climate Control Air Filter Repair procedures
1. |
Remove the stopper (B) from the glove box (A).

|
2. |
Remove the air damper (A) from the glove box (B).

|
3. |
Remove the filter cover (A) by pressing the knob.

|
4. |
Replace the air filter (A) according to the replacement cycle on the
user manual. When replacing it, mind the direction of the air filter.

•
|
To remove the filter easily, press the righthand side
inward and then pull out the filter.
|
•
|
When driving in an air-polluted area or on rugged terrain,
check and replace the air filter as frequently as possible.
|
|
|
5. |
Install in the reverse order of removal.
|
Description
Located in the blower unit, the climate control air filter eliminates foreign
materials and odor. The particle filter performs the roles of an odor filter
as well as ...
Description
Located in the blower unit, the intake actuator regulates the intake door by
a signal from the control unit. Pressing the intake selection switch will shift
between r ...
Other information:
The indicator on the switch will illuminate when the Blind Spot Detection System
(BSD) switch is pressed with the Engine Start/Stop Button ON.
If vehicle speed exceeds 20 mph (32 km/h), the system will activate. If you press
the switch again, the switch indicator and system will be turned off ...
Description
•
Input speed sensor uses an electric current type hall sensor in which
the current is changed by the magnetic variation.
•
Input speed sensor and output speed sensor are integrated and installed
in the transax ...