Kia Sportage: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications
Kia Sportage QL (2015-2019) Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) Specifications
| Specification |
HO2S [Bank 1/Sensor 1]
|
Item |
Specification |
|
Heater Resistance (Ω) |
2.5 - 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
|
Item |
Specification |
|
Heater Resistance (Ω) |
3.3 - 4.1Ω[21°C(69.8°F)] |
Knock Sensor (KS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the knock sensor connector (A).
3.
Meas ...
Heated Oxygen Sensor (HO2S) Description and operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output vol ...
Other information:
Kia Sportage QL (2015-2019) Service Manual: Description and operation
Description If the Gasoline Engine Control system components (sensors, ECM, injector, etc.) fail, interruption to the fuel supply or failure to supply the proper amount of fuel for various engine operating conditions will result. The following situations may be encountered. ...
Kia Sportage QL (2015-2019) Owners Manual: Checking the tire inflation pressure
1.After driving approximately 4 ~ 6 miles (7 ~ 10 km or about 10 min), stop at a safe location. 2.Screw the connection hose (10) of the compressor to the valve stem 3.Plug the compressor power cord into the vehicle power outlet. 4.Adjust the tire inflation pressure to the recomended tire infl ...
Copyright © www.ksportagegl.com 2015-2019