Kia Sportage: SRSCM / Front Impact Sensor (FIS) Description and operation

Kia Sportage QL (2015-2021) Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and operation

Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
They are remote sensors that detect acceleration due to a collision at its mounting location.
The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the Ignition from the vehicle. 2. Disconnect the battery negative terminal and wait for at least thirty seconds b ...

Front Impact Sensor (FIS) Components and components location
Components 1. Front Impact Sensor (FIS) ...

Other information:

Kia Sportage QL (2015-2021) Service Manual: Rear Center Seat Belt Retractor Repair procedures


Replacement    When installing the belt, be careful not to damage the retractor. 1. Remove the roof trim. (Refer to Roof Trim - "Roof Trim Assembly") ...

Kia Sportage QL (2015-2021) Service Manual: E-CVVT motor Troubleshooting


Signal Waveform • There is no separate sensor inside E-CVVT. Exhaust side 4-flank type target wheel is applied in order to compare CKPS and CMPS and calculate the valve timing. ...

Copyright © www.ksportagegl.com 2015-2021